Omron K6CM User Manual page 142

6 How to Use the Software Tool
Detailed status screen by device
Motor name
Note 1. You can switch the bar display only, the bar display and the graph display by the following icon on
the lower left of the motor status display screen.
2. The maximum value on the vertical axis of the graph automatically changes depending on the mea-
sured value and alarm set value. It cannot be set to any value.
3. The time series period can be switched to 1 hour / 1 day / 1 month / 2 months / 6 months / 1 year / 2
years / 5 years / 10 years / 20 years. If a period of more than 1 day is selected and displayed, data
may be thinned out and displayed.
• In case of bar display and graph display
Motor name
(max.10)
Bar display only, bar display
and graph display switching button
6 - 12
Device Type
Measured value
Current value
Bar display and graph display
Bar display only
Monitor type
Individual
alarm status
Device Type
Current value, unit
Graph display of measured value trend
Individual
Individual
alarm status
alarm name
Time series
Time series of individual alarm status bar
(green: normal, yellow: warning, red: critical)
Monitoring/Monitoring stopped
Time series
K6CM Motor Condition Monitoring Device User's Manual (N219)
Monitoring/Monitoring stopped
Switch between
[Monitoring by
motor category]
and [Monitoring
by monitoring
category]
Switch between
[Monitoring by
motor category]
and [Monitoring
by monitoring
category]
Graph display of
measured value
trend