Omron K6CM User Manual page 149

Setting screen Each screen to be started from the tool button
• [Motor information] Button
You can enter the location of the motor and the model of the motor.
• [Add device] Button
(1) Add a device to the currently open project.
Set the motor name, device type, and the IP address already set for the K6CM device, and
click the [Add] Button.
(2) To add more devices, repeat (1).
If there are no other devices to add, click the [End] Button.
Note If the entered IP address is duplicated with the IP address of the already registered devices,
K6CM Motor Condition Monitoring Device User's Manual (N219)
or if the same device type exists under the same motor name, the following [error] Dialog Box
will be displayed. Please click the [OK] Button and take necessary action.
6 How to Use the Software Tool
6
6 - 19