12
Click the [OK] Button.
The following [Downloading to device] wizard screen will be displayed.
When the download is successful, the following [Motor name setting] wizard screen will be dis-
played.
Note If the download fails, "Failed to download." is displayed on the "Download to device" wizard screen
in the following [Start navigation] Dialog Box. After checking the connection, click the [Execute]
Button, or click the [Return] Button and go back to one of the steps from step 4.
13
In the field of "Motor name that the target devices belong to", set the motor name to which the
target device belongs.
The initial value is MotorName.
Precautions for Correct Use
• It is not possible to register the same type of device in the same motor name.
• Up to 3 devices can be registered in the same motor name.
K6CM Motor Condition Monitoring Device User's Manual (N219)
4 Introduction of the Software Tool
4
4 - 35