Omron K6CM User Manual page 75

Contents
Sample program for This is a sample program for monitoring the motor
NJ/NX-series*2 condition using the NJ/NX-series Controller.
*1. If you use the SYSMAC Gateway and the CX-Compolet for purposes other than using the Motor condition monitoring Tool, please pur-
chase those licenses.
*2. It is added from the software tool Ver1.1.0.0 (production after June, 2018). For the version of the software tool, check the printing of
CD-ROM. With the update program of our I-Web, you can update the software tool of the old version to the latest version.
K6CM Motor Condition Monitoring Device User's Manual (N219)
Description
4 Introduction of the Software Tool
Location
Sample program:
With Japanese comments:
CD drive \ SampleProgram \ Program \ SampleProgram_-
J_V1_0_0.smc2
With English comments:
CD drive \ SampleProgram \ Program \ SamplePro-
gram_E_V1_0_0.smc2
Function block (sample):
CD drive \ SampleProgram \ FunctionBlock \ SampleF-
B_EN_K6CM_Read_V1_0_0.slr
4
4 - 9