Omron K6CM User Manual page 258

Appendices
Right-click anywhere in the Target Device List in the Toolbox on the right of the EtherNet/IP
Connection Setting Tab Page and select [Display EDS Library] from the menu.
Click the [Install] Button at the bottom left, select the following EDS file, click [Open] and
install it.
Model name of the K6CM
K6CM-CIM
K6CM-ISM
K6CM-VBM
When installation is completed, the category "Motor Condition Monitoring Device" and the
registered K6CM devices are displayed under the tree of the OMRON Corporation in the
EDS Library Dialog Box.
(3)-2 Adding K6CM Devices to the Network
Click the
nection Setting Tab Page.
A - 42
EDS file name
K6CM_CIM_EIP_R2.eds
K6CM_ISM_EIP_R2.eds
K6CM_VBM_EIP_R2.eds
(Add Target Device) Button in the [Toolbox] on the right of the EtherNet/IP Con-
K6CM Motor Condition Monitoring Device User's Manual (N219)