Omron K6CM User Manual page 241

2
Starting the EtherNet/IP network setting screen
Select [File (F)] | [Create New (N)] | [EtherNet/IP] from the menu bar.
3
Installing EDS Files
To configure K6CM as an EtherNet/IP tag data link communications target, install the EDS file
containing the configuration information of the K6CM in the Network Configurator. Once this
installation is done, this operation is unnecessary from the next setting.
Install using the EDS file which is stored on the CD bundled with the K6CM device. EDS files
can also be downloaded from our I-Web.
Register the CIP revision corresponding to the EIP version on the side label of the K6CM
device.
EIP version
Ver.1.0
Ver.1.1
K6CM Motor Condition Monitoring Device User's Manual (N219)
Major revision
1
2
K6CM-CIMA-EIP
MOTOR CONDITION MONITORING
CURRENT INFORMATION MONITOR
MSIP-
REM-
OMR-
K6CM01
Open-type
Measuring Equipment.
MAIN : Ver.1.0
(01)04549734178693
EIP : Ver.1.1
MES : Ver.1.0
(21)XXXXXXXXXX
See Manual
MAC ADDRESS : YYYYYYYYYYYY
URL: http://www.aso.omron.co.jp/download/
Kyoto, 600-8530, JAPAN
MADE IN JAPAN
CIP revision
Revision on the Hardware list
Rev1
Rev2
MAIN : Ver.1.0
EIP : Ver.1.1
MES : Ver.1.0
Appendices
A
A - 25