7-2-2
Monitoring Type Switching
1
Switch the monitoring category by pressing the [DISP] key on the front of the device.
Each time you press the [DISP] key, the measurement unit (monitoring category) changes.
Monitor Type
Vibration & temperature
type
Insulation resistance type
Comprehensive current
diagnosis type
K6CM Motor Condition Monitoring Device User's Manual (N219)
7 Motor Monitoring with the K6CM Devices and the Software Tool
LCD indicating the unit (Monitoring
type) of the measurement value
Numeric LCD display:
The numerical value in the above
measurement unit is displayed.
Switching the Monitoring type:
Press the [DISP] key.
LCD indicating the unit of
measurement value
"G"
↓
"mm/s"
↓
"T"
↓
"ΔT"
"MΩ"
↓
"mA"
"Cim"
↓
"A"
Monitoring category
Acceleration
Velocity
Motor temperature
Temperature Gap (i.e., the difference from the room
temperature of the motor temperature)
Insulation resistance
Leakage current
Degradation level
Current
7
7 - 5