Monitoring Method - Omron K6CM User Manual

7 Motor Monitoring with the K6CM Devices and the Software Tool
7-2-3

Monitoring method

When monitoring with the K6CM devices, it can be monitored by the following method.
• Front alarm bar
• Transistor output
Monitor with the Front Alarm Bar
When monitoring with front alarm bar, the following monitoring is available.
Front
Status display
alarm bar
Not lit. Not lit.
Green "MON" lit
Yellow
Red
Not lit. "ERR" lit
Status display:
"MON": Measurement
and monitoring
in progress
"ERR": Self-diagnosis
error occurrence
7 - 6
Status
Measuring and moni- When using the trigger function (external trigger or internal trigger),
toring Not yet measuring and monitoring is not started yet after the power is turned
ON.
Comprehensive alarm: All measured values are in nor-
normal mal condition.
Comprehensive alarm: There is no "critical" in the mea-
Warning surement value,
There is " warning " even if at
least one state.
Comprehensive alarm: There is "critical" in even one
Critical measurement value.
When the self-diagno- Self diagnostic error is occurring.
sis error occurs
K6CM Motor Condition Monitoring Device User's Manual (N219)
Meaning
At the end of measuring and mon-
itoring, the display of the front
alarm bar is retained (only when
using the trigger function).
Alarm bar
: Comprehensive alarm: Normal
: Comprehensive alarm: Warning
: Comprehensive alarm: Critical
: Self-diagnosis error. Or, measuring
and monitoring, Not yet