K6CM-CI Comprehensive Current Diagnosis Type
Three-phase induction motor
*1. The dedicated cable between the dedicated CT and the K6CM device is 2.9 m long. It cannot be extended.
Also, there is no designation in the phase to be installed. Be careful of the installation direction stated on the
CT label and mount it to any one phase.
Note The level of degradation may vary when the motor is driven by the inverter. In that case, slightly shift the
inverter drive frequency.
Also always measure and monitor the level of degradation at the same inverter drive frequency.
Mount a dedicated CT between the motor and the inverter.
K6CM Motor Condition Monitoring Device User's Manual (N219)
K6CM-CIM
Comprehensive current
diagnosis Type Device
(When necessary)
External trigger input
Dedicated CT *1
To the software tool,
PC software and/or PLC
Transistor Output
Comprehensive alarm (failure warning) output
Comprehensive alarm (failure critical) output
Self-diagnosis output
EtherNet/IP (Ethernet cable)
1 Overview
1
1 - 9