Identity Object (Class Id: 01 Hex) - Omron K6CM User Manual

8-3-5

Identity Object (Class ID: 01 hex)

This object reads the identification information of the K6CM, reads the state of the built-in EtherNet/IP
port, and resets the K6CM.
Service Codes
Service code
01 hex
0E hex
05 hex
*1. The following data is obtained by Get_Attributes_All.
Parameter name
Revision
Reserved
Reserved
Reserved
For Get_Attributes_All, the data size is 8 bytes for the class and 28 bytes for the instance.
Class ID
Specify 01 hex.
Instance ID
Specify the following data according to the target.
Class: 00 hex
Instance: 01 hex
Attribute ID
The attribute ID specifies the information to read.
Class Attribute ID
The class attribute ID specifies the attribute of the object class.
Attri- Parameter
bute ID name
01 hex Revision
K6CM Motor Condition Monitoring Device User's Manual (N219)
8 Monitoring and Setting Using the EtherNet/IP Devices
Service name
Get_Attributes_All Reads the values of all attri-
butes.
Get_Attribute_Single Reads the value of the speci-
fied attribute.
Reset Resets the K6CM. This
parameter is used to reset
the K6CM when you change
the parameter settings and
want to apply them.
Data
Data type Value
UINT 0001 hex
UINT 0001 hex
UINT 0000 hex
UINT 0000 hex
Description
Revision of the object
Description
Supported
*1
Supported.
Not supported.
Attri-
bute
Read
Supported services
Classes Instances
*1 Supported.
.
Supported.
Supported.
Data
Data type Default value
UINT 0001 hex
8 - 23
8