Fba Data In 1; To 12 Fba Data In 2 To 12 - ABB FCAN-01 User Manual

64
Par. Parameter name
no.
ACS350
ACS355
*
Actual parameter group number depends on the drive type. For example, group C
(group 3) equals to parameter group 54 in ACS350 and ACS355, and group 52 in
ACSM1 and ACS850.
**
For more information, see chapter

1 FBA DATA IN 1

This parameter represents data word 1 sent by the drive over the
CANopen network. For the contents, see configuration parameter
group 2, parameter 1 (FBA DATA OUT 1) on page 59.
Note: The FCAN-01 configuration parameters are 16-bit
parameters. If the mapped parameter is a 32-bit parameter, it
automatically reserves two consecutive parameters. For example,
mapping of a 32-bit parameter to Par. no. 1 also reserves Par.
no. 2.
Note: The FBA DATA IN parameters select the data to be
transferred from the drive to the CANopen master.From the drive's
perspective this corresponds to Tx PDO communication in
CANopen.
Drive configuration
**
Parameter
name in
ACSM1
the drive
ACS850
Communication
CANopen
master
FBA DATA IN
FBA DATA OUT
Alternative settings
**
on page 89.
ABB drive
(Tx PDO)
(Rx PDO)
Default
setting
Status Word (SW)
Actual values
Control Word (CW)
References