Mechanical Installation; What This Chapter Contains; Mounting - ABB FCAN-01 User Manual

Mechanical installation

What this chapter contains

This chapter contains placing and mounting instructions for the
module.
WARNING! Follow the safety instructions given in this manual and
the drive manuals.

Mounting

The FCAN-01 CANopen Adapter module is to be inserted into its
specific position in the drive. The module is held in place with
plastic pins and one screw. The screw also provides the earthing
of the fieldbus cable shield connected to the module.
On installation of the module, the signal and power connection to
the drive is made through a 20-pin connector. (All drives do not
use all the available signals so the connector on the drive may
have fewer pins.)
Mounting procedure:
• Insert the module carefully into its position on the drive.
• Fasten the screw.
Note: Correct installation of the screw is essential for fulfilling the
EMC requirements and for proper operation of the module.
Mechanical installation
39