Master configuration
What this chapter contains
This chapter gives information on configuring the CANopen
master station for communication through the FCAN-01 CANopen
Adapter module.
Configuring the system
After the adapter module has been mechanically and electrically
installed according to the instructions in the previous chapters,
and has been initialised by the drive, the master station must be
prepared for communication with the module.
Refer to the master station documentation for more information.
EDS files
The Electronic Data Sheet (EDS) files specify the device
properties for the CANopen master (client). The EDS files for the
FCAN-01 CANopen Adapter module contain information on the
supported communication objects. The EDS files for ABB Drives
are available through your local ABB representative.
Master configuration
67