Firmware Upgrade From Tftp; Firmware Upgrade From Ftp - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabut ethernet switch
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Unit
Source File
Destination File
Click the Upgrade button to initiate the firmware upgrade.

Firmware Upgrade from TFTP

This window is used to initiate a firmware upgrade from a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from
TFTP, as shown below:
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
VRF Name
Source File
Destination File
Click the Upgrade button to initiate the firmware upgrade.

Firmware Upgrade from FTP

This window is used to initiate a firmware upgrade from an FTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from
FTP, as shown below:
Description
Select the switch unit that will be used for this configuration here.
In this field the source firmware file's filename and path will be
displayed after selection. To navigate to the location of the firmware
file located on the local PC, either double click in the text box or click
the Browse button.
Enter the destination path and location where the new firmware should
be stored on the switch. This field can be up to 64 characters long.
Figure 15-3 Firmware Upgrade from TFTP Window
Description
Select the switch unit that will be used for this configuration here.
Enter the TFTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the firmware file located on the
TFTP server here. This field can be up to 64 characters long.
Enter the destination path and location where the new firmware should
be stored on the switch. This field can be up to 64 characters long.
601

Advertisement

Table of Contents
loading

Table of Contents