Firmware Upgrade From Http; Firmware Upgrade From Tftp; Firmware Backup To Http - D-Link DGS-1100-16 Reference Manual

Firmware Upgrade from HTTP

This window is used to initiate a firmware upgrade from a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade
from HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Source File
Click the Upgrade button to initiate the firmware upgrade.

Firmware Upgrade from TFTP

This window is used to initiate a firmware upgrade from a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > firmware Upgrade
from TFTP, as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
Source File
Click the Upgrade button to initiate the firmware upgrade.

Firmware Backup to HTTP

This window is used to initiate a firmware backup to a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to
HTTP, as shown below:
Figure 13-3 Firmware Upgrade from HTTP window
Description
Enter the source filename and path of the firmware file
located on the local PC. Alternatively click the Browse button
to navigate to the location of the firmware file located on the
local PC.
Figure 13-4 Firmware Upgrade from TFTP window
Description
Enter the TFTP server's IPv4 address here.
Enter the source filename and path of the firmware file
located on the TFTP server here.
D-Link DGS-1100 Series Switch User Manual
7 7 3 3