D-Link DXS-3600 Series Reference Manual page 504

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in ARP Access List are described below:
Parameter
ARP Access List Name
Click the Add button to add a new entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specified entry.
After clicking the Edit button, the following window will appear.
The fields that can be configured are described below:
Parameter
Action
IP
Sender IP
Sender IP Mask
MAC
Sender MAC
Sender MAC Mask
Click the Back button to return to the previous page.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
ARP Inspection Settings
This window is used to view and configure the ARP inspection settings.
To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP
Inspection Settings, as shown below:
Description
Enter the ARP access list name used here. This name can be up to 32
characters long.
Figure 9-43 ARP Access List (Edit) Window
Description
Select the action that will be taken here. Options to choose from are
Permit and Deny.
Select the type of sender IP address that will be used here. Options to
choose from are Any, Host, and IP with Mask.
After selecting the Host or IP with Mask options as the type of IP,
enter the sender IP address used here.
After selecting the IP with Mask option as the type of IP, enter the
sender IP mask used here.
Select the type of sender MAC address that will be used here. Options
to choose from are Any, Host, and MAC with Mask.
After selecting the Host or MAC with Mask options as the type of
MAC, enter the sender MAC address used here.
After selecting the MAC with Mask option as the type of MAC, enter
the sender MAC mask used here.
493