Physical Stacking - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
NOTE: If the boot configuration file is damaged, the Switch will automatically revert back to
NOTE: If the boot image file is damaged, the Switch will automatically use the backup image
Click the Copy button to see the following window.
The fields that can be configured in Copy File are described below:
Parameter
Source
Destination
Click the Apply button to initiate the copy.
Click the Cancel button the discard the process.

Physical Stacking

The switch supports stacking 4 switches together while being managed by one IP address through Telnet,
the Web User Interface, the RJ45 console port or through SNMP. This cost effective switch provides an
affordable solution for administrators to upgrade their networks using either the DXS-3600-EM-Stack or
the DXS-3600-EM-4QXS modules to scale and stack the switches. This increases overall reliability,
serviceability, and availability.
•
Duplex Chain - The duplex chain topology stacks switches together in a chain-link format. Using
this method, data transfer is only possible in one direction and if there is a break in the chain,
then data transfer will obviously be affected.
the default configuration.
file in the next boot up.
Figure 4-60 File System (Copy) Window
Description
Select the source file's switch Unit ID. Select the type of source file
that will be copied next. Options to choose from are startup-config
and Source File. Only after selecting the Source File option can the
source file's path and filename be entered in the space provided.
Select the destination file's switch Unit ID. Select the type of
destination file that will be copied next. Options to choose from are
startup-config, running-config, and Destination File. Only after
selecting the Destination File option can the destination file's path
and filename be entered in the space provided. Tick the Replace
check box to replace the current running configuration with the
indicated configuration file.
73