Temperature Status - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

In the Device Information section, the following display parameters are available:

Firmware Version

Boot Code Version

Hardware Version

Serial Number

System Up Time

Temperature Status

In the Temperature section, the user can view a real-time display of the switch's internal temperature.

The temperature of the switch is mainly influenced by two factors: (1) the environment, and (2) the

internal air-flow of the switch. In the DXS-3600 Series Hardware Installation Guide, there are some

guidelines that can assist the user with the installation of this switch in a temperature friendly environment.

The fan modules, installed in this switch, have temperature sensors built-in that automatically controls the

air-flow inside the switch.

Figure 3-2 Device Information (Highlight) Window

Here the IP address of the switch's main interface is displayed.

Here the Subnet Mask of the switch's main interface is displayed.

Here the Gateway IP address of the switch's main interface is

Here the MAC address of the switch is displayed.

Here the Firmware version of the switch is displayed.

Here the Boot Code of the switch is displayed.

Here the Hardware version of the switch is displayed.

Here the Serial number of the switch is displayed.

Here the System's up time is displayed.