D-Link DXS-3600 Series Reference Manual page 554

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
MEPID
Port
Direction
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
Click the MEPID Detail button to view more detailed information about the specified MEP.
Click the Remove MEP button to view the remove MEP table.
Click the Edit LCK button to modify the LCK settings of the specified entry.
Click the Delete button to delete the specified entry.
After clicking the MEPID Detail button, the following page will appear.
Figure 10-6 CFM Settings (Add MA, Add MEP, MEPID Detail) Window
Click the Edit button to modify the specified entry.
Description
Enter the MEP's ID here. The range is from 1 to 8191. Each MEP
configured in the same MA must have a unique MEP ID. The MEP on
different MA can have the same MEPID. Before creating a MEP, its
MEP ID should be configured in the MA's MEP ID list.
Select the switch's unit ID and port number that will be used here.
Select the direction of the MEP here. Options to choose from are Up
and Down.
•
Up: Specifies to create an inward facing (up) MEP.
•
Down: Specifies to create an outward facing (down) MEP.
543