Cfm Port Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in CFM LCK Settings are described below:
Parameter
State
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.

CFM Port Settings

This window is used to view and configure the CFM feature's port settings.
To view the following window, click OAM > CFM > CFM Port Settings, as shown below:
The fields that can be configured in CFM Port Settings are described below:
Parameter
Unit
From Port ~ To Port
State
Click the Apply button to accept the changes made.
Click the View Detail button to more detailed information about the CFM settings on the specified port.
After clicking the View Detail button, the following page will appear.
Description
Select to Start or Stop the CFM management lock here. This feature
will result in the MEP to send LCK PDUs to a client level MEP.
Figure 10-10 CFM Port Settings Window
Description
Select the switch's unit ID that will be used here.
Select the switch's port range that will be used here.
Select the enable or disable the CFM feature on the specified port(s)
here.
Figure 10-11 CFM Port Settings (View Detail) Window
546