Firmware Upgrade From Tftp; Firmware Backup To Http - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Parameter
Unit
Source URL
Destination URL
Click the Upgrade button to initiate the firmware upgrade.

Firmware Upgrade from TFTP

This window is used to initiate a firmware upgrade from a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > firmware Upgrade from
TFTP, as shown below:
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
Source URL
Destination URL
Click the Upgrade button to initiate the firmware upgrade.

Firmware Backup to HTTP

This window is used to initiate a firmware backup to a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to HTTP,
as shown below:
Description
Select the switch unit that will be used for this configuration here.
Enter the source filename and path of the firmware file located on the
local PC. This field can be up to 64 characters long. Alternatively click
the Browse button to navigate to the location of the firmware file
located on the local PC.
Enter the destination path and location where the new firmware should
be stored on the Switch. This field can be up to 64 characters long.
Figure 13-3 Firmware Upgrade from TFTP window
Description
Select the switch unit that will be used for this configuration here.
Enter the TFTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Enter the source filename and path of the firmware file located on the
TFTP server here. This field can be up to 64 characters long.
Enter the destination path and location where the new firmware should
be stored on the Switch. This field can be up to 64 characters long.
372