Firmware Upgrade - D-Link NUCLIAS DNH-100 User Manual

Nuclias Connect Software User Manual
Nuclias
The Firmware Upgrade function allows users to perform a firmware upgrade. For online update, please confirm your device is
online. For manual upgrade, please visit D-Link website of your region to see if newer firmware available.
Navigate to Configuration > Firmware Upgrade > [Site] > [Network].
Click Apply to save the above configuration settings.
Click Clear to delete the defined settings.
The firmware upgrade status and result can be seen at the Run Status section. The results can be sorted by Run Time, Name,
IP Address, MAC Address, Model Type and Result.
Configuration
Block Description
Online Check
Click to configure online upgrade.
Upgrade
Firmware
Check For Update Click to check if newer firmware is available on
online server.
Manual Upgrade Click to configure manual upgrade.
Firmware
Change Click to select a firmware file to upload. Files
are model specific.
Time Start
Click the drop-down menu to select a specific
time or update immediately.
Page 70
Nuclias Connect Configuration

Firmware Upgrade