D-Link DXS-3600 Series Reference Manual page 503

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping
Binding Entry, as shown below:
The fields that can be configured in DHCP Snooping Manual Binding are described below:
Parameter
MAC Address
VID
IP Address
Unit
Port
Expiry
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Dynamic ARP Inspection
ARP Access List
This window is used to view and configure the dynamic ARP inspection settings.
To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Access
List, as shown below:
Figure 9-41 DHCP Snooping Binding Entry Window
Description
Enter the MAC address of the DHCP snooping binding entry here.
Enter the VLAN ID of the DHCP snooping binding entry here. This
value must be between 1 and 4094.
Enter the IP address of the DHCP snooping binding entry here.
Select the switch unit that will be used for this configuration here.
Select the appropriate port used for the configuration here.
Enter the expiry time value used here. This value must be between 60
and 4294967295 seconds.
Figure 9-42 ARP Access List Window
492