Ddm Voltage Threshold Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in DDM Temperature Threshold Settings are described below:
Parameter
Unit
Port
Action
Type
Value
Click the Apply button to accept the changes made.

DDM Voltage Threshold Settings

This window is used to view and configure the DDM Voltage Threshold Settings for specific ports on the
Switch.
To view the following window, click OAM > DDM > DDM Voltage Threshold Settings, as shown below:
The fields that can be configured in DDM Voltage Threshold Settings are described below:
Parameter
Unit
Port
Action
Figure 10-26 DDM Temperature Threshold Settings Window
Description
Select the switch unit that will be used for this configuration here.
Select the port used for the configuration here.
Select the action that will be taken here. Options to choose from are
Add and Delete.
Select the type of temperature threshold. Options to choose from are
Low Alarm, Low Warning, High Alarm, and High Warning.
Enter the threshold value. This value must be between -128 and
127.996 °C.
Figure 10-27 DDM Voltage Threshold Settings Window
Description
Select the switch unit that will be used for this configuration here.
Select the port used for the configuration here.
Select the action that will be taken here. Options to choose from are
560