D-Link DXS-3600 Series Reference Manual page 342

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Color Aware
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
After selecting the Two Rate Setting tab option, at the top of the page, the following page will be
available.
The fields that can be configured are described below:
Parameter
Aggregate Policer Name
CIR
Confirm Burst
PIR
Peak Burst
Confirm Action
Description
transmit value in the space provided. This value sets the 802.1p
value and transmits the packet with the new value.
•
When selecting the Set-DSCP-1P option, enter the IP DSCP and
1P transmit values in the spaces provided.
•
When selecting the Transmit option, packets will be transmitted
unaltered.
Select the color aware option here. Options to choose from are None
and Enabled. When color aware is not specified, the policer works in
the color blind mode. When color aware is enabled, the policer works
in the color aware mode.
Figure 7-15 Aggregate Policer (Two Rate Setting) Window
Description
Enter the aggregate policer's name here.
Enter the Committed Information Rate (CIR) value here. This value
must be between 0 and 10000000 kbps. The committed packet rate is
the first token bucket for the two-rate metering.
Enter the confirm burst value here. This value must be between 0 and
16384 Kbytes. The confirm burst value specifies the burst size for the
first token bucket in kbps.
Enter the Peak information Rate (PIR) value here. This value must be
between 0 and 10000000 kbps. The peak information rate is the
second token bucket for the two-rate metering.
Enter the peak burst value here. This value must be between 0 and
16384 Kbytes. The peak burst value is the burst size for the second
token bucket in kilobytes.
Select the confirm action here. The confirm action specifies the action
to take on green color packets. If the confirm action is not specified,
the default action is to Transmit. Options to choose from are Drop,
Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and Set-DSCP-1P.
•
When selecting the Drop option, the packet will be dropped.
•
When selecting the Set-DSCP-Transmit option, enter the IP
331