Ping - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
RCP Server IP
User Name
VRF Name
Destination File
Log Type
Click the Backup button to initiate the system log backup.

Ping

Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination
node then responds to or "echoes" the packets sent from the Switch. This is very useful to verify
connectivity between the Switch and other nodes on the network.
To view the following window, click Tools > Ping, as shown below:
The fields that can be configured in IPv4 Ping are described below:
Parameter
VRF Name
Target IPv4 Address
Description
Enter the RCP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the RCP server in the space provided. When
the IPv6 option is selected, enter the IPv6 address of the RCP server
in the space provided.
Enter the user name used for the RCP connection here. This name
can be up to 32 characters long.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the destination path and location where the log file should be
stored on the RCP server. This field can be up to 64 characters long.
Select the log type that will be backed up to the RCP server. When the
System Log option is selected, the system log will be backed up.
When the Attack Log is selected, the attack log will be backed up.
Figure 15-21 Ping Window
Description
Enter the VRF instance's name that will be used in this configuration
here. This name can be up to 12 characters long.
Select and enter an IP address to be pinged.
614