D-Link DXS-3600 Series Reference Manual page 319

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Password
TCP Reconnect
Update Source
VID
Loopback
Weight
Allow AS in
Allow AS in Value
Default Originate
Route Map Name
Click the Apply button to accept the changes made.
After clicking the Please Select button, the following page will appear.
Description
the Default option to use the default value.
Enter the BGP neighbor or peer group's clear text password here. The
password is used when the TCP connection between BGP neighbors
is established. This password can be up to 25 characters long. Select
the Clear button to clear the password configured.
Enter the TCP reconnect value here. If the TCP connection to the
neighbor fails, BGP will try another TCP connection to the neighbor
after the TCP reconnect time. The range is from 1 and 65535 seconds.
Select the Default option to use the default value, which is 120
seconds.
Select the Default option to use the default update source settings.
Enter the VLAN ID of the interface that will be used here. The range is
from 1 to 4094.
Enter the loopback interface's ID that will be used here. The range is
from 1 to 8.
Enter the weight value here. The BGP weight is an attribute that is
assigned by the local router to affect the best path selection on the
local router. Use this option to specify the weight to be associated the
routes learned from the specified neighbor. The route with highest
weight will be chosen as the preferred route. Weight is an attribute
which is specified in the ingress direction, and is not an attribute to be
advertised with route. It is used to specify preference to routes
received from a neighbor over another neighbor. The range is from 0
to 65535. Select the Default option to use the default value, which is 0
for routes received from a BGP peer and 32768 for routes sourced by
the local route.
Select to enable or disable the AS allow feature here. This feature is
used to enable routers to allow their own AS appearing in the received
BGP update packets.
Enter the maximum number of local AS, allowed to appear in the AS-
path attribute of update packets here. The range is from 1 to 10. If no
number is entered, the default value of 3 times is used.
Select to enable or disable the default originate feature here. Use this
feature to inject the default route to a BGP neighbor. The injection of a
default route does not require the presence of 0.0.0.0 in the routing
table. When the route map is specified, the default route will not be
injected unless there is a route in the routing table that is permitted by
the route map. If a route map is configured but the route map doesn't
exist, it acts as if the route map is not specified.
Enter the route map's name here. This name can be up to 16
characters long.
308