Firmware Backup & Upgrade - D-Link DES-1210/ME Series Manual

4 Configuration
FTP password: Enter the password which you want to save/restore from for the configuration.
FTP Port: Enter the port which you want to save/restore from for the FTP server.
FTP Path: Enter the path which you want to save/restore from for the FTP server.
FTP File Name: Specifies the file name which you want to save/restore from for the configuration.
Click Backup to save the current settings to the FTP server.
Firmware Backup & Upgrade
Allow for the firmware to be saved, or for an existing firmware file to be uploaded to the Switch. Two methods
can be selected: HTTP, TFTP or FTP.
HTTP: Backup or upgrade the firmware to or from your local PC drive.
Backup/Restore Image ID number: Specify the firmware image ID number to be backup or restored.
Click Backup to save the firmware to your disk.
Click Browse to browse your inventories for a saved firmware file.
Click Upgrade after selecting the firmware file you want to restore.
TFTP: Backup or upgrade the firmware to or from a remote TFTP server. The maximum Telnet Server
connection is 4.
Backup/Restore Image ID number: Specify the firmware image ID number to be backup or restored.
TFTP Server IP Address: Specify the IPv4 or IPv6 address.
TFTP File Name: Enter the file name which you want to save/restore from for the firmware.
Click Backup to save the firmware to the TFTP server.
Click Upgrade after selecting the firmware file you want to restore.
FTP: Backup or upgrade the firmware to or from your FTP server.
Backup/Restore Image ID number: Specify the firmware image ID number to be backup or restored.
DES-1210/ME Series Metro Ethernet Managed Switch User Manual
Note: Switch will reboot after restore, and
all current configurations will be lost.
Figure 4.9 – Tool Menu > Firmware Backup and Upgrade
1 1 5 5