D-Link DXS-3600 Series Reference Manual page 33

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured for Log State are described below:
Parameter
Log State
Click the Apply button to accept the changes made.
The fields that can be configured for Source Interface Settings are described below:
Parameter
Source Interface State
Type
VID
Click the Apply button to accept the changes made.
The fields that can be configured for Buffer Log Settings are described below:
Parameter
Buffer Log State
Severity
Figure 3-17 System Log Settings Window
Description
Select the enable or disable the system log feature's global state here.
Description
Select this option to enable or disable the source interface's global
state.
Select the type of interface that will be used. Options to choose from
are Loopback, Mgmt, and VLAN.
Enter the interface's VID used here. For loopback interfaces this ID
can be from 1 to 8. For the management (Mgmt) interface this value is
always 0. For VLAN interfaces this value is from 1 to 4094.
Description
Select whether the enable or disable the buffer log's global state here.
Options to choose from are Enable, Disabled, and Default. When
selecting the Default option, the buffer log's global state will follow the
default behavior.
Select the severity value of the type of information that will be logged.
Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical),
22