Network Qos Policy Map - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Network QoS Class Map
Name
Click the Apply button to accept the changes made.
Click the Match button to configure the match rule settings for the map name.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Match button, the following page will appear.
The fields that can be configured are described below:
Parameter
Match CoS
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.

Network QoS Policy Map

This window is used to view and configure the network QoS policy map settings.
To view the following window, click QoS > QoS PFC > Network QoS Policy Map, as shown below:
Description
Enter the network QoS class map's name to be associated with a
traffic policy here. This name can be up to 32 characters long.
Figure 7-19 Network QoS Class Map (Match) Window
Description
Select the IEEE 802.1Q Class of Service (CoS) value to be matched
here. The range is from 0 to 7. When a packet is received, the packet
will be given an internal CoS. This internal CoS is used to select the
transmit queue based on the CoS to queue map. The CoS queue with
a higher number will receive a higher priority. Select to None option to
disable the matching of CoS values.
Figure 7-20 Network QoS Policy Map Window
335