D-Link DXS-3600 Series Reference Manual page 507

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
VID List
State
Click the Apply button to accept the changes made.
ARP Inspection Statistics
This window is used to view and clear the ARP inspection statistics information.
To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP
Inspection Statistics, as shown below:
The fields that can be configured are described below:
Parameter
VID List
Click the Clear by VLAN button to clear the information based on the VLAN ID(s) entered.
Click the Clear All button to clear all the information in this table.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
ARP Inspection Log
This window is used to view, configure and clear the ARP inspection log information.
To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP
Inspection Log, as shown below:
The fields that can be configured in ARP Inspection Log are described below:
Parameter
Log Buffer
Click the Apply button to accept the changes made.
Description
Enter the VLAN ID list used here.
Select to enable or disable the ARP inspection option's state for the
specified VLAN here.
Figure 9-47 ARP Inspection Statistics Window
Description
Enter the VLAN ID list used here.
Figure 9-48 ARP Inspection Log Window
Description
Enter the log's buffer value used here. This value must be between 1
and 1024. By default, this value is 32.
496