D-Link DXS-3600 Series Reference Manual page 246

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in MLD SSM Mapping Settings are described below:
Parameter
SSM Mapping State
Click the Apply button to accept the changes made.
The fields that can be configured in Add Static SSM Mapping are described below:
Parameter
Source Address
ACL Name
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
The fields that can be configured in MLD SSM Mapping Table are described below:
Parameter
Group Address
Click the Find button to locate a specific entry based on the information entered.
After clicking the Select button, the following page will appear.
Figure 6-90 MLD SSM Mapping Settings Window
Description
Select to enable or disable the Source Specific Multicast (SSM)
mapping feature for groups in the configured SSM range.
Description
Enter the source address associated with an MLD membership for a
group identified by the access list here.
Enter the standard IPv6 access list's name here that contains the
multicast groups to be mapped. To permit a group, specify "any" in
source address field and specify the group address in destination
address field of the access list entry.
Alternatively, click the Select button to find and select any of the
exiting access lists configured on this switch to be used in this
configuration.
Description
Enter the MLD multicast group's address here.
235