D-Link DXS-3600 Series Reference Manual page 313

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Neighbor
VRF Name
Action
Click the Apply button to accept the changes made.
After clicking the Please Select button, the following page will appear.
The fields that can be configured are described below:
Parameter
VRF
Click the OK button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Neighbor Map Settings
This window is used to view and configure the BGP neighbor's map settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > Neighbor Map Settings, as
shown below:
Description
There are two neighbor options here, IPv4 Address and Peer Group.
Select the IPv4 Address option and enter the IP address of the
neighbor peer here.
Select the Peer Group option and enter the BGP peer group's name
here. This name can be up to 32 characters long.
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long. Alternatively, click the Please Select
button to open a new window to select and use a configured VRF
instance from the list.
Select Shutdown to disable the BGP neighbor or peer group.
Select No Shutdown to re-enable the BGP neighbor or peer group.
Figure 6-180 Neighbor Shutdown (Please Select) Window
Description
Select the VRF instance from the list that will be used here.
Figure 6-181 Neighbor Map Settings Window
302