D-Link DXS-3600 Series Reference Manual page 566

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Threshold
Window
Click the Apply button to accept the changes made.
Description
•
Error Frame Seconds: This feature is used to enable notifying
the Ethernet OAM error frame second event and configure the
monitor threshold and window on the specified port.
•
Error Frame Period: This feature is used to enable notifying the
Ethernet OAM error frame period event and configure the
monitor threshold and window on the specified port.
Enter the threshold value here.
•
When Error Symbol is selected as the link monitor, enter the
number of symbol errors here. If symbol errors occur in the
specified window and it exceeds the threshold value, then the
event is generated. The range is from 0 to 4294967295.
•
When Error Frame is selected as the link monitor, enter the
number of frame errors here. If the error frames occur in the
specified window and exceeds the threshold value, then an error
frame event is triggered. The range is from 0 to 4294967295.
•
When Error Frame Seconds is selected as the link monitor,
enter the number of error frames in seconds here. If the number
of the error frames occurred in the specified window and
exceeds the threshold value, then the frame event is triggered.
The range is from 1 to 900 seconds.
•
When Error Frame Period is selected as the link monitor, enter
the number of frame errors that must occur for this event to be
triggered here. The range is from 0 to 4294967295.
Enter the window value here.
•
When Error Symbol is selected as the link monitor, enter the
amount of time over which the threshold is defined here. If
threshold symbol errors occur within the period, an event
notification OAM PDU should be generated with an error symbol
period event TLV, indicating that the threshold has been crossed
in this window. The range is from 10 to 600 deciseconds.
•
When Error Frame is selected as the link monitor, enter the
amount of time over which the threshold is defined here. If the
threshold frame errors occur within the period, an event
notification OAM PDU will be generated with an error frame
event TLV, indicating that the threshold has been crossed in this
window. The range is from 10 to 600 deciseconds.
•
When Error Frame Seconds is selected as the link monitor,
enter the amount of time over which the threshold is defined
here. If threshold frame errors occur within the period, an event
notification OAM PDU will be generated with an error frame
seconds summary event TLV indicating that the threshold has
been crossed in this window. The range is from 100 to 9000
deciseconds.
•
When Error Frame Period is selected as the link monitor, enter
the number of frames over which the threshold is defined here. If
threshold frame errors occur within the period, an event
notification OAM PDU should be generated with an error frame
period event TLV indicating that the threshold has been crossed
in this window. The lower bound is the number of minimum
frame-size frames that can be received in 100ms on the
underlying physical layer. The upper bound is the number of
minimum frame-size frames that can be received in one minute
on the underlying physical layer. The range is from 148810 to
89286000.
555