Host Key - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in SSH Global Settings are described below:
Parameter
IP SSH Server State
IP SSH Service Port
Authentication Timeout
Authentication Retries
Click the Apply button to accept the changes made.

Host Key

This window is used to view and generate the SSH host key.
To view the following window, click Security > SSH > Host Key, as shown below:
The fields that can be configured in Host Key Management are described below:
Parameter
Crypto Key Type
Key Modulus
Click the Generate button to generate a host key based on the selections made.
Click the Delete button to remove a host key based on the selections made.
Figure 9-83 SSH Global Settings Window
Description
Select to enable or disable the SSH server's global state.
Enter the SSH service port number used here. This value must be
between 1 and 65535. By default, this number is 22.
Enter the authentication timeout value here. This value must be
between 30 and 600 seconds. By default, this value is 120 seconds.
Enter the authentication retries value here. This value must be
between 1 and 32. By default, this value is 3.
Figure 9-84 Host Key Window
Description
Select the crypto key type used here. Options to choose from are the
Rivest Shamir Adleman (RSA) key type and the Digital Signature
Algorithm (DSA) key type.
Select the key modulus value here. Options to choose from are 360,
512, 768, 1024, and 2048 bit.
532