D-Link DXS-3600 Series Reference Manual page 204

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in VRF Max Routes Settings are described below:
Parameter
Max Routes
Warning Threshold
None
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
The fields that can be configured in VRF Import Map Settings are described below:
Parameter
Import Map Name
None
Click the Apply button to accept the changes made.
The fields that can be configured in Route Distinguisher Settings are described below:
Parameter
Route Distinguisher
Figure 6-33 VRF Settings (Edit) Window
Description
Enter the maximum number of routes allowed within the VRF instance
here. The range is from 1 to 16384.
Enter the warning threshold value in percentage here. A notification
message will be sent when the routes number reach the threshold and
no more routes can be written into the hardware. The range is from 1
to 100 percent.
Selecting the warning-only option specifies that when the route
numbers exceeds the threshold, a notification message will be sent,
but more routes can be written into hardware.
Select this option to disable the VRF maximum routes feature.
Description
Enter the name of import route map of the VRF instance here. This
feature is used to configure the import route map of one VRF. This is
used by the routing protocol to filter the routes imported to the routing
table associated with a VRF instance. One VRF only has one import
route map. The new import route map will overwrite the value set
before. This name can be up to 16 characters long.
Select this option to disable the VRF import map feature.
Description
Enter the VRF instance's route distinguisher, which is used to prepend
an 8-bytes value to an IPv4 prefix to create a VPN-IPv4 prefix here.
193