D-Link DXS-3600 Series Reference Manual page 115

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Clone
From Port ~ To Port
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
When Hybrid was selected as the VLAN Mode, the following page will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
VLAN Precedence
Native VLAN
VID
Action
Add Mode
Allowed VLAN Range
Clone
From Port ~ To Port
Click the Apply button to accept the changes made.
Description
between 1 and 4094.
Select this option to enable the clone feature.
Select the range of ports that will be used in the clone feature here.
Figure 5-20 VLAN Interface (Hybrid) Window
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk
Promiscuous, and Trunk Secondary.
Select the acceptable frame behavior option here. Options to choose
from are Tagged Only, Untagged Only, and Admit All.
Select to enable or disable the ingress checking function.
Select the VLAN precedence option here. Options to choose from are
Mac-based VLAN and Subnet-based VLAN.
Tick this option to enable the native VLAN function.
After ticking the Native VLAN option the following parameter will be
available. Enter the VLAN ID used for this configuration here. This
value must be between 1 and 4094.
Select the action that will be taken here. Options to choose from are
Add, Remove, Tagged, and Untagged.
Select whether to add an Untagged or Tagged parameters.
Enter the allowed VLAN range information here.
Select this option to enable the clone feature.
Select the range of ports that will be used in the clone feature here.
104