D-Link DXS-3600 Series Reference Manual page 310

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

This window is used to view and configure BGP neighbor peer group settings.

To view the following window, click L3 Features > BGP > BGP Neighbor > Peer Group, as shown

The fields that can be configured in Peer Group are described below:

Remote AS Number

Click the Apply button to accept the changes made.

The fields that can be configured in Peer Group Member are described below:

Address Family

Figure 6-176 Peer Group Window

Enter the BGP peer group's name here. This name can be up to 32

characters long.

Enter the VRF instance's name that will be used here. This name can

be up to 12 characters long. Alternatively, click the Please Select

button to open a new window to select and use a configured VRF

instance from the list.

Enter the remote BGP neighbor's AS number here. The range is from

1 and 4294967295.

Select Add to add a new entry based in the information entered.

Select Delete to delete an entry based in the information entered.

Select the address family used here. Options to choose from are IPv4

Unicast, IPv4 VRF, and VPNv4.

IPv4 Unicast: Select to use the IPv4 unicast family here.

IPv4 VRF: Select and enter the IPv4 VRF instance's name that

will be used here. This name can be up to 12 characters long.