D-Link DXS-3600 Series Reference Manual page 365

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Sequence No.

Protocol Type

Protocol Type - TCP

After selecting the TCP option as the Protocol Type, the following section will appear.

Figure 8-6 ACL Configuration Wizard (Create, Packet Type, IPv4, TCP) Window

The fields that can be configured in Assign rule criteria are described below:

Enter the ACL rule number here. This value must be between 1 and

65535. Select Auto Assign to automatically generate an ACL rule

number for this entry.

Select the protocol type option here. Options to choose from are TCP,

UDP, ICMP, EIGRP, ESP, GRE, IGMP, OSPF, PIM, VRRP, IP-in-IP,

PCP, Protocol ID, and None.

When available, enter the Protocol ID value in the space provided.

This value must be between 0 and 255.

When available, select the Fragments option to include packet

fragment filtering.

Select and enter the source information here. Options to choose from

are Any, Host, and IP. When the Any option is selected, any source

traffic will be evaluated according to the conditions of this rule. When

the Host option is selected, enter the source host's IP address here.

When the IP option is selected, the Wildcard option will also be

available. Enter the group of source IP addresses by using a wildcard