D-Link DXS-3600 Series Reference Manual page 156

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
MLD Snooping Settings
This window is used to view and configure the MLD snooping settings.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD
Snooping Settings, as shown below:
The fields that can be configured in Global Settings are described below:
Parameter
Global State
Click the Apply button to accept the changes made.
The fields that can be configured in VLAN Status Settings are described below:
Parameter
VID
Click the Apply button to accept the changes made.
The fields that can be configured in MLD Snooping Table are described below:
Parameter
VID
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to view all the entries.
Click the Show Detail button to see the detail information of the specific VLAN.
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following window will appear.
Figure 5-62 MLD Snooping Settings Window
Description
Select this option to enable or disable MLD snooping global state.
Description
Enter a VLAN ID from 1 to 4094, and select to enable or disable MLD
snooping on the VLAN.
Description
Enter a VLAN ID from 1 to 4094.
145