Multicast Vlan - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD
Snooping Statistics Settings, as shown below:
The fields that can be configured in MLD Snooping Statistics Settings are described below:
Parameter
Statistics
VID
Unit
From Port ~ To Port
Click the Clear button to clear the MLD snooping related statistics.
The fields that can be configured in MLD Snooping Statistics Table are described below:
Parameter
Find Type
VID
Unit
From Port ~ To Port
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Multicast VLAN

Multicast VLAN Settings
This window is used to view and configure the multicast VLAN settings.
Figure 5-68 MLD Snooping Statistics Settings Window
Description
Select the interface here. Options to choose from are All, VLAN, and
Port.
Enter a VLAN ID between 1 and 4094. This is available when VLAN is
selected in the Statistics drop-down list.
Select the switch unit that will be used for this configuration here. This
is available when Port is selected in the Statistics drop-down list.
Select the appropriate port range used for the configuration here. This
is available when Port is selected in the Statistics drop-down list.
Description
Select the interface type. Options to choose from are VLAN, and Port.
Enter a VLAN ID between 1 and 4094. This is available when VLAN is
selected in the Find Type drop-down list.
Select the switch unit that will be used for this configuration here. This
is available when Port is selected in the Find Type drop-down list.
Select the appropriate port range used for the configuration here. This
is available when Port is selected in the Find Type drop-down list.
152