DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
RIPng Database
This window is used to display the RIPng feature's routing database.
To view the following window, click L3 Features > RIPng > RIPng Database, as shown below:
The fields that can be configured in RIPng Database are described below:
Parameter
IPv6 Address
Click the Find button to locate a specific entry based on the information entered.
OSPF
OSPFv2
OSPFv2 Process Settings
This window is used to view and configure the OSPFv2 process settings.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Process Settings, as
shown below:
Description
routing table. Use this option to influence the metric of routes received
on different interfaces and thus influence the preference of the route.
Select the Default option to use the default metric offset value, which
is 1.
Figure 6-45 RIPng Database Window
Description
Enter the IPv6 address that will be used for this display here.
Figure 6-46 OSPFv2 Process Settings Window
203