Session Timeout; Dhcp; Service Dhcp - D-Link DXS-3600 Series Reference Manual
Layer 2/3 managed 10gigabut ethernet switch
Hide thumbs
Also See for DXS-3600 Series:
- Cli reference manual (1456 pages) ,
- Reference manual (1328 pages) ,
- Hardware installation manual (55 pages)
Table of Contents
Advertisement
DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Session Timeout
This window is used to view and configure the session timeout settings.
To view the following window, click Management > Session Timeout, as shown below:
The fields that can be configured in Session Timeout are described below:
Parameter
Web Session Timeout
Console Session Timeout
Telnet Session Timeout
SSH Session Timeout
Click the Apply button to accept the changes made.
DHCP
Service DHCP
This window is used to view and configure the DHCP relay service on the switch.
To view the following window, click Management > DHCP > Service DHCP, as shown below:
Figure 4-22 Session Timeout Window
Description
Enter the time in seconds of the web session timeout. Tick the Default
check box to return to the default setting. The value is from 60 to
36000 seconds. The default value is 180 seconds.
Enter the time in minutes of the web session timeout. Tick the Default
check box to return to the default setting. The value is from 0 to 1439
minutes. 0 means never timeout. The default value is 3 minutes.
Enter the time in minutes of the Telnet session timeout. Tick the
Default check box to return to the default setting. The value is from 0
to 1439 minutes. 0 means never timeout. The default value is 3
minutes.
Enter the time in minutes of the SSH session timeout. Tick the Default
check box to return to the default setting. The value is from 0 to 1439
minutes. 0 means never timeout. The default value is 3 minutes.
Figure 4-23 Service DHCP Window
48
Advertisement
Table of Contents
