Class Map - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port ~ To Port
DSCP List
Color
Click the Apply button to accept the changes made.

Class Map

This window is used to view and configure the class map settings.
To view the following window, click QoS > Advanced Settings > Class Map, as shown below:
The fields that can be configured are described below:
Parameter
Class Map Name
Multiple Match Criteria
Click the Apply button to accept the changes made.
Click the Match button to configure the specific entry.
Click the Delete button to remove the specific entry.
After clicking the Match button, the following page will be available.
Description
Select the switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Enter the DSCP list value here that will be mapped to a color. This
value must be between 0 and 63.
Select the color option that will be mapped to the DSCP value. Options
to choose from are Green, Yellow, and Red.
Figure 7-12 Class Map Window
Description
Enter the class map name here. This name can be up to 32 characters
long.
Select the multiple match criteria option here. Options to choose from
are Match All and Match Any.
Figure 7-13 Class Map (Match) Window
328