Appendix B - System Log Entries - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Appendix B - System Log Entries

The following table lists all possible entries and their corresponding meanings that will appear in the
System Log of this switch.
802.1X
Log Description
Event description: 802.1X Authentication failure.
Log Message: 802.1X authentication fail [due to <reason>] from (Username:
<username>, <interface-id>, MAC: <mac-address>)
Parameters description:
reason: The reason for the failed authentication.
username: The user that is being authenticated..
interface-id: The interface name.
macaddr: The MAC address of thr authenticated device.
Event description: 802.1X authentication success (Username: <username>,
<interface-id>, MAC: <mac-address>)
Parameters description:
username: The user that is being authenticated.
interface-id: The interface name.
macaddr: The MAC address of the authenticated device.
AAA
Log Description
Event description: This log will be generated when AAA global state is enabled or
disabled.
Log Message: AAA is <status>.
Parameters description:
status: The status indicates the AAA enabled or disabled.
Event description: This log will be generated when login successfully.
Log Message: Successful login through <exec-type> <from client-ip> authenticated
by AAA <aaa-method> <server-ip> (Username: <username>).
Parameters description:
exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web,
Web(SSL).
client-ip: It indicates the client's IP address if valid through IP protocol.
aaa-method: It indicates the authentication method, e.g.: none, local,
server.
server-ip: It indicates the AAA server IP address if authentication method is
remote server.
Username: It indicates the username for authentication.
Event description: This log will be generated when login failure.
Log Message: Login failed through <exec-type> <from client-ip> authenticated by
AAA <aaa-method> <server-ip> (Username: <username>).
Parameters description:
exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web,
622
Severity
Warning
Informational
Severity
Informational
Informational
Warning