DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in Cable Diagnostics are described below:
Parameter
Unit
From Port ~ To Port
Click the Test button to test the specific port.
Click the Clear button to clear all the information for the specific port.
Click the Clear All button to clear all the information in this table.
Ethernet OAM
Ethernet OAM Settings
This window is used to view and configure the Ethernet Operations, Administration, and Maintenance
(OAM) settings.
To view the following window, click OAM > Ethernet OAM > Ethernet OAM Settings, as shown below:
Figure 10-19 Cable Diagnostics Window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
551