Lldp-Dcbx Port Settings - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

The fields that can be configured in LLDP-MED Port Settings are described below:

From Port ~ To Port

Notification

Capabilities

Click the Apply button to accept the changes made.

LLDP-DCBX Port Settings

This window is used to view and configure which optional type-length-value settings (TLVs) in the Data

Center Bridging Exchange protocol (DCBX) TLV set will be transmitted and encapsulated in the

LLDPDUs and sent to neighbor devices.

To view the following window, click L2 Features > LLDP > LLDP-DCBX Port Settings, as shown below:

Figure 5-78 LLDP-MED Port Settings Window

Select the switch unit that will be used for this configuration here.

Select the appropriate port range used for the configuration here.

Select this option to enable or disable transmitting the LLDP-MED

notification TLV.

Select this option to enable or disable transmitting the LLDP-MED

capabilities TLV.

Select this option to enable or disable transmitting the LLDP-MED

inventory management TLV.