D-Link DXS-3600 Series Reference Manual page 127

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in VLAN Mapping Profile are described below:
Parameter
Profile ID
Type
Click the Add Profile button to add a new VLAN mapping profile.
Click the Find button to locate a specific entry based on the information entered.
After clicking the Add Rule button next to an Ethernet type profile, the following page will appear.
Figure 5-34 VLAN Mapping Profile (Ethernet, Add Rule) Window
The fields that can be configured in VLAN Mapping Rule are described below:
Parameter
Rule ID
Figure 5-33 VLAN Mapping Profile Window
Description
Enter the ID of the VLAN mapping profile here. A lower ID has a higher
priority. The ID range is from 1 to 1000.
Select the profile type here. Different profiles can match different fields.
Options to choose from are Ethernet, IP, IPv6, and Ethernet-IP.
•
Ethernet: The profile can match Layer 2 fields.
•
IP: The profile can match Layer 3 IP fields.
•
IPv6: The profile can match IPv6 destination or source
addresses.
Description
Enter the VLAN mapping rule's ID here. If not specified, the rule ID
begins from 10 and is incremented by 10 for every new rule. The range
116