D-Link DXS-3600 Series Reference Manual page 635

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Log Description
Event description: This log will be generated when RADIUS assigned a valid VLAN
ID attributes.
Log Message: RADIUS server <server-ip> assigned VID: <vid> to port <interface-
id> (Username: <username>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
vid: The assign VLAN ID that authorized by from RADIUS server.
interface–id: It indicates the port number of the client authenticated.
username: It indicates the username for authentication.
Event description: This log will be generated when RADIUS assigned a valid
bandwidth attributes.
Log Message: RADIUS server <server-ip> assigned <direction> bandwidth:
<threshold> to port < interface -id> (Username: <username>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
Direction:
ingress or egress.
Threshold: The assign threshold of bandwidth that authorized by from
RADIUS server.
interface–id: It indicates the port number of the client authenticated.
username: It indicates the username for authentication.
Event description: This log will be generated when RADIUS assigned a valid
priority attributes.
Log Message: RADIUS server <server-ip> assigned 802.1p default priortiy:
<priority> to port < interface -id> (Username: <username>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
priority: The assign priority that authorized by from RADIUS server.
interface–id: It indicates the port number of the client authenticated.
username: It indicates the username for authentication.
Event description: This log will be generated when RADIUS assigned ACL script
but fails to apply to the system due to insufficient resource.
Log Message: RADIUS server <server-ip> assigns <username> ACL failure at port
< interface -id> (<acl-script>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
username: It indicates the username for authentication.
interface-id: It indicates the port number of the client authenticated.
acl-script: The assign ACL script that authorized by from RADIUS server.
BGP
Log Description
Event description: BGP FSM with Peer has gone to the successfully established
state.
Log Message: BGP-6-ESTABLISH: BGP connection is successfully established
(Peer:<ipaddr>).
Parameters description:
It indicates the direction for bandwidth control, e.g.:
624
Severity
Informational
Informational
Informational
Warning
Severity
Informational