Vrf; Vrf Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

VRF

VRF Settings

This window is used to view and configure the Virtual Routing and Forwarding (VRF) settings. After a new
VRF instance is created, a new VRF routing table will be created. When a VRF instance is deleted, the
related VRF routing table will be deleted at the same time and all routing instances based on this VRF will
be destroyed. All IP interfaces associated to this VRF will be restored to the global routing instance. In the
other words, all configurations based on this VRF will be removed.
To view the following window, click L3 Features > VRF > VRF Settings, as shown below:
The fields that can be configured in VRF Settings are described below:
Parameter
VRF Name
Click the Apply button to add a new VRF instance.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the entries.
Click the Edit button to modify the specified entry.
Click the Show Detail button to view more detailed information about the VRF instance.
Click the Delete button to delete the specified entry.
After clicking the Edit button, the following page will appear.
Figure 6-32 VRF Settings Window
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long.
192